9-8
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Adding a User (Local User List)
You can add up to 100 users (including the default login user name).
1
Display the screen.
1
[
System Menu/Counter
] key > [
User Login/Job Accounting
]
2
"User Login Setting" [
Next
] > "Local User List" [
Add/Edit
]
2
Enter the user information.
[
Add
] > Enter the user information > [
OK
]
NOTE
By default, one of each default user with machine administrator rights and administrator privileges is already stored.
Each user's properties are:
Machine Administrator
User Name:
DeviceAdmin
Login User Name:
Login Password:
Access Level:
Machine Administrator
Administrator
User Name:
Admin
Login User Name: Admin
Login Password:
Admin
Access Level:
Administrator
* Upper case and lower case letters are distinguished (case sensitive).
It is recommended to periodically change the user name, login user name and login password regularly for your
security.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [
Login
]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Item
Descriptions
User Name
Enter the name displayed on the user list (up to 32 characters).
Login User
Name
Enter the login user name to login (up to 64 characters). The same
login user name cannot be registered.
Login Password
Enter the password to login (up to 64 characters). Reenter the same
password for confirmation and select the [
OK
] key.
Model Name
Login User Name
Login Password
4056i
4000
4000
5056i
5000
5000
6056i
6000
6000
