TriTree Handheld Battery Operated Flour Sifter User Instructions Download Page 4

Page: 4 / 4

3 / 4

Troubleshooting

Issue

Possible Reason

Solution

Device doesn’t work

No Battery installed

Installing 2 x AA batteries

Batteries are installed with
polarities reversed

Batteries must be installed according to correct polarities

Device works weakly,

flour flows slowly

Low battery

Replace batteries

Mesh adhesion or clogged

Clear the mesh screen

Device gets noisy

Mesh screen not fixed
tightly or not in place

Check the mesh, re-install it or fasten the screw

Handle gets loose

Screws of the handle are
getting loose

1. Remove the battery compartment lid;
2. Unfasten the two screws under the Switch button;

3. Carefully remove the Switch module, fasten the screw

revealed;

4. Install the Switch module back and fasten the two screws in

Step 2.

Summary of Contents for Handheld Battery Operated Flour Sifter

Page 1: ...Handheld Battery Operated Flour Sifter User Instructions Contents In the Package 1 Product Specifications 1 How to Use 1 Care Warnings 2 Battery Instructions 2 Disposal 2 Troubleshooting 3...

Page 2: ...may cause extra noises make sure to repeat this step before every use 3 Open the battery compartment insert 2 x AA batteries and put the cover lid back on seal it properly In case the handle is loose...

Page 3: ...orrect polarity Non rechargeable batteries are not to be recharged Different types of batteries or new and used batteries are not to be mixed Exhausted batteries are to be removed from the item DO NOT...

Page 4: ...Low battery Replace batteries Mesh adhesion or clogged Clear the mesh screen Device gets noisy Mesh screen not fixed tightly or not in place Check the mesh re install it or fasten the screw Handle ge...