Triton Unichrome Aire, Installation Instructions Manual

Page: 2 / 8

Monobasin mixer
2
INTRODUCTION
This guide contains all the neccessary fitting
instructions for your Unichrome monobasin
mixer tap.
Note: This basin mixer tap is suitable for use
with monobasin style basins only.
Please read this guide carefully before beginning
your installation.
The mixer tap installation must be carried out by
a suitably competent person and in the sequence
of the instruction book.
Care taken during the installation will ensure
long life and trouble free operation from your
tap.
DO NOT choose a position where the tap
could become frozen.
Replacement parts can be ordered from Triton
Customer Service
(see back page) .
WATER PRESSURE
This tap is suitable for all water pressures and
should be fitted in accordance with Water
Regulations.
Pressure range – 0.1 bar to 10 bar
COMPONENTS
The tap set comprises of the following:
1 Monobasin mixer tap
2 Silicon seal (small)
3
Silicon seal (large)
4 Horseshoe plate
5 Stud
6 Retaining nut
- Steel braided hoses (2 off)
7 Plunger control rod
8 Fixing block
9 Plunger
10 Upper waste outlet
11 Upper silicon seal
12 Lower silicon seal
13 Lower waste outlet
14 Control lever
Check that all parts are correct ( fig.1)
1
2
3
4
5
8
6
14
7
9
10
11
12
13
Fig.1