Triton TDL Gateway Modem, Installation Procedures Manual, Page: 3 / 47

i
nsTaLLaTion
3
Software Installation:
• Check
Management > Terminal Status > Configuration Summary > Program
Version.
• If “Program Version” is earlier than 2.4.0, the application will need to be
upgraded using the following instructions, must be completed before proceeding:
1. With USB flash drive inserted, go to Management > Terminal Status > Save
Parameters To External Storage. Press ENTER to continue.
2. Go to Management > System Parameters > Software Update and select load file:
3. System will restart and install software.
4. For XScale only, or any full load (xd) , also do the following:
 After system boots, login to Management Functions and select “us.tsf” when
prompted for country option. Press ENTER to accept verification screen.
 Select “Restore Parameters from External Storage” and select file saved in step 1.
Press ENTER to accept verification screen.
 Review optional screen and optional screen button settings in Management >
Terminal Status > Configuration Summary to confirm everything is correct.
Software to Update to 2.4.0 (if Unit is already 2.4.0 proceed to the service packs)
• xd20xcsf2.4.0.tlf
- X1 (XScale)
Inside web site file:
2_4_0 US XScale 10_4 color.exe
• xu30xcsf2.4.0.tfv - (X2 8” or 10.4” display)
Inside web site file: 2_4_0 US X2 8 and 10.4.exe
• xu30dcsf2.4.0.tfv - (X2 5.7” display)
Inside web site file:
2_4_0 US X2 5_7.exe
• Traverse -
No update required
DO NOT PLUG IN THE MODEM AND START THE ATM UNTIL
ALL SOFTWARE HAS BEEN INSTALLED!
ATM must be at a minimum 2.4.0 with service packs and SSL certificates loaded
Service Pack Installation:
Repeat steps 2 & 3 to load the applicable Service Pack. Service Packs are required.