Body dryer
11
DO NOT switch on the electricity supply until all
safety covers have been correctly fitted.
Replace the wiring safety cover
(fig.17)
.
Connecting the body dryer to a shower
Where a shower is to share the same electrical
supply the wiring should be routed as shown in
fig.18
. The connectivity at the body dryer is as
shown in
fig.15
and adjacent to the connecting
blocks on the body dryer.
Always be aware that the electrical supply and
electrical safety MUST meet the requirement for
the larger of the two loads.
Meter
Incoming
supply
fuse
Meter
tails
Consumer
unit
Shower
unit
Fuse or
MCB
RCD
(can be part of
consumer unit)
80A or 100A
main switch
Body dryer
unit
Pull cord
isolation
switch
Fig.18
