Electric shower
14
T00336
OPERATING THE SHOWER
To start the shower
Press the
START/STOP
button and water will
flow.
To stop the shower
Press the
START/STOP
button again and water
will cease to flow.
To use the power selector
The power selector has three positions -
cold,
economy
and
high
— as shown in (
fig.21)
.
•
Blue
symbol is for cold water only.
•
Red
single symbol is the economy setting
for using less power during warmer months.
Temperature adjustment at this setting is via
the temperature control.
•
Red
double symbol is the high setting which
allows the highest flow achievable for your
preferred temperature.
Adjustment of the temperature control on the
COLD
setting will only alter the force of the
water from the showerhead. It will not alter
the water temperature.
Note:
If the stated flow rate required for the unit
cannot be met due to low water pressure, it will
be necessary to operate the unit on ‘economy’
setting during the warmer months because of
flow rate limitations entering the unit.
WARNING!
If restarting immediately after stopping,
be aware that a slug of hot water will be
expelled for the first few seconds.
WARNING!
Before normal operation of the
shower, it is essential that the
commissioning procedure has been
completed correctly.
Fig.21
Power Selector
Cold
Economy
High
Temperature
control
Start/Stop
button
