© Triton Electronics Ltd 2022
Doc. AMV35003_1.doc v1.04
PAGE 8 OF 52
3.
Select the welding process. This has most effect when calculating heat input using process
efficiency
–
4.
These are the main control features and are discussed in more detail later.
5.
Options for saving configuration files and exporting the recorded data.
The next sections go through the individual screens and options, there are also examples for how to
run through a setup in the
2.2
Set Alarms
The alarms show on the main screen. There are two levels an amber warning level and a red out of
tolerance level. To turn on the channel’s alarm press the channel button and the state changes to
ENABLED:
To set the values, enter the target values in the central column. Click in the box and a numeric entry
pad will be displayed. Once the values have been entered press the Set AMBER and Set RED buttons
to automatically set the limits. By default these are 10% and 12.5% respectively, but this can be
changed, by clicking inside the red and amber value boxes. Individual boxes can also be changed as
required.
The alarms are saved with the configuration file.
2.3
Calibrate
To access the calibration menu please contact Triton Electronics Ltd.
