Triton Blue V 1200 User Manual Download Page 2

For your own safety, please read this user manual carefully before installing the device. 

 

 

 

Keep this device away from rain and moisture !

Unplug mains lead before opening the housing.

 

Every person involved with the installation, operation and maintenance of this device has to: 
-be qualified 
-follow carefully the instructions of this manual 
 

INTRODUCTION: 

Thank you for having chosen this professional moving head. 
You will see you have acquired a powerful and versatile device. 
 
Unpack the device. Inside the box you should find: the fixture device, a power cable, an 
XLR connection cable, a safety cable and this manual. Please check carefully that there is no damage 
caused by transportation. Should there be any, consult your dealer and don’t install this device. 
 

Features 

• 

 

pan 540°, tilt 265° 

•  

colors :

 

• 

color wheel1 with 4 dichroic glass panes, 2 correction- 1 UV-filter 

• 

color wheel2 with 6 dichroic glass panes, for a total of 7 colors 

•  

 static gobo wheel has 5 static gobos plus open with different speed gobo shaking   

•  

 rotating gobo wheel has 5 rotating gobos plus open, all gobos can be easily replaceable and gobo 

indexing 

•  

 strobe effect : 0~13 flashes per second or random strobe

   

•  

Stepless Zoom 

•  

automatic program 

•  

display : digital address and function setting 

•  

High speed pan & tilt movements

 

 

Control board with 4-digit display and foil-keyboard for adjusting the DMX-starting address, 

Pan/tilt-Reverse, Program, Reset, lamp on/off, operating hours and etc 

•  

digital display can be turn 180° reverse to fit for different installation position

 

local or remote 

resetting 

 

lamp switches ON/OFF locally 

 

auto test for all functions

 

 

value of each DMX-channel can be displayed 

 -                             GS-SMS-Y1200-V1.0-02NR 

Summary of Contents for V 1200


















Reviews: