-
１６
- XM010-V1.4-NR
- Mic sensitivity
With this function you can adjust the sensitivity of the microphone.
1. Select “MIC” by pressing
[UP]
or
[DOWN]
button.
2.
Press
[ENTER]
, the display shows “
M-XX
”, “
XX
” stands for the number from 0 to 99.
3. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
-Automatic Run by no DMX
With this function you can automatic run the device by no DMX.
1. Select “AUTO” by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows “CLOS”, “HOLD”, “AUTO” or “AUDI”.
3. Press
[UP]
or
[DOWN]
button to select “CLOS”, “HOLD”, “AUTO” or “AUDI”, the default is “HOLD”.
4. Press
[ENTER
] to confirm or Press
[MODE/ESC]
to return to the main menu.
- Fan’s mode select
With this function you can select the Fan’s mode.
1. Select “FANS” by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows “HIGH” or “AUTO”.
3. Select “HIGH” or “AUTO” by pressing
[UP]
or
[DOWN]
button.
4. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
- Movement mode select
With this function you can select the movement mode.
1. Select “SPEE” by pressing [UP] or [DOWN] button.
2. Press
[ENTER]
, the display shows “SP-1” or “SP-2”.
3. Select “SP-1” or “SP-2” by pressing
[UP]
or
[DOWN]
button.
4. Press [ENTER] to confirm or Press
[MODE/ESC]
to return to the main menu..
- Reset
With this function you can reset the device via the Control Board.
1. Select
“REST”
by pressing
[UP]
or
[DOWN]
button.
2.
Press
[ENTER]
to reset or Press
[MODE/ESC]
to return to the main menu.
- Restore factory settings
With this function you can restore the factory settings of the device. All settings will be set back to the default
values (shaded). Any edited scenes will be lost.
1. Select
“LODA”
by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows
“ON”
or
“OFF”
.
3. Press
[UP]
to select
“ON”
if you wish to enable this function or press
[DOWN]
button to
“OFF”
if you don’t.
4. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
- Software version
With this function you can display the software version of the device.
1. Select
“VER”
by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, The display will show “V-XX”, "XX" stands for the version number, such as the display may
also show,"V-2.0","V-9.9"etc.
3. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
- Main menu 3
