User Manual | SIRIUS 7 LED 8W RGBW Triton Blue | Rev.Jan. 2014 | www.triton-blue.com
!
!
ENGLISH
For your own safety, please read this user manual carefully before you initially
start-up
Every person involved with the installation, operation and maintenance of this device has to:
-Be qualified.
-Follow the instructions of this manual.
-Consider this manual to be part of the total product.
-Keep this manual for the entire service life of the product
-Pass this manual on to every further owner or use of the product.
-Download the last version of the user manual from the internet in
www.triton-blue.com
!
Introduction
Thank you for having chosen a SIRIUS 7 LED 8W RGBW Controller. If you follow the instructions given in
this manual, we are sure that you will enjoy this device for a long period of time.
SIRIUS 7 LED 8W RGBW CONTROLLER USER´S MANUAL
Introduction
This product is 7 channels. The fixture can operate in three different operating modes; DMX control,
sound-active, or in a Master/Slave configuration. This product comes with several built in programs that
can be used, while operating as a dimmer unit or when used in multiples linked in a Master/Slave
configuration. For best results use fog or special effects smoke to enhance the beams projections.
WARNING:
To prevent or reduce the risk of electrical hock or fire, do not expose this
unit to rain or moisture.
WARNING:
This may cause severe eye damage. Avoid looking directly into the light
source at all times.
Specifications
Model: SIRIUS 7 LED 8W RGBW
Input voltage: AC 100-230V, 50-60 Hz
Max Power: 80 w
DMX control: 7 channels
DMX connection: XLR 3 pin
Control sound: Built in Microphone
Model LED: 4 in 1
Number LED: 7 pcs 8 w
Beam Angle: 25º(option other beam)
IP class: INDOOR IP20
Maximum Ambient Temperature: 40ºC
Packing size: 270x265x110 mm
G.W.: 3Kg
NOTE: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.
Installation
1. - The light can be fixed in any place, but the light must keep a distance between person and objects at
1m minimum. And please make sure the light is fixed well, the light should be earthed.
2. - Please make sure the rated voltage and frequency should suit to your local voltage.
3. - Connection of the DMX 512.
