User Manual | SIRIUS 14 LED 3W RGB 3 IN 1 IP 65 | Triton Blue | Rev.Jan. 2014 | www.triton-blue.com
Control Quick Setup
For detailed instructions on display panel operations and functions please advance to the section titled;
“Display Panel Functions”. These steps assume that you have read and are
familiar with setting up a DMX
serial data link.
DMX-512 control without “ID” address
The equipment operates on 11 channels of DMX (“STAG” personality). Address each fixture in increments
of10channels. (1, 11, 21, 31, etc...) To save time you can use the same DMX address for each fixture. All
fixtures will then respond simultaneously to control. You may also group your fixtures and address those
groups alike for faster programming and control.
1. Access the control panel function by pressing the “MENU” button until the ‘RUN MODE’ is displayed.
Press “ENTER” and use the “UP/DOWN” buttons to select ‘DMX’ function. Then, Press “MENU” button
until ‘DMX512 ADDRESS’ is displayed. Use the “UP/DOWN” buttons
to increase or decrease channels
between 001 and 512.
2. Press the (ENTER) button to confirm action. Then press “MENU” to exit. Deactivate ID addressing in
each fixture by setting panel function ‘ID ON/OFF’ to OFF. “SET” to “ID ON/OFF” to “OFF”.
DMX-512 addressing with ID address
1. Follow instructions 1 for DMX512 addressing.
2. Activate ID addressing in each fixture by setting panel function “ID ON/OFF” to ON. “Settings” to “ID
ON/OFF” to “ON” For every DMX512 starting address the user can set 66 separate ID addresses. Set.ID
addresses in each fixture by setting panel function “ID address” to incremental values. (1, 12, 24, 36 etc.)
“Settings” to “address” to
“01 ~ 66”
Setting the DMX address
Each fixture requires a start address from 1 to 512. A fixture requiring one or more channels
for control
begins to read the data on the channel indicated by the start address. For example, a fixture that occupies
or uses 5 channels of DMX and was addressed to start on DMX channel 100, would read data from
channels: 100, 101, 102, 103 and 105. Choose start addresses so
that the channels used do not overlap
and note the start address selected for future reference.
The equipment uses up to11channels of DMX. lf
this is your first time using DMX, we recommend reading the DMX Primer in the Appendix Section.
Control Panel Functions
All fixture functions and settings are accessible via the built-in control panel interface.
