User manual Dimmer 1 canal TR-D1 | Triton Blue | Rev. Sep 2013 | www.triton-
‐
blue.com
For your own safety, please read this user manual carefully before you initially start-up.
Every person involved with the installation, operation and maintenance of this device has to:
Be qualified.
Follow the instructions of this manual.
Consider this manual to be part of the total product.
Keep this manual for the entire service life of the product.
Pass this manual on to every further owner or use of the product
Download the last version of the user manual from the internet in
www.triton-blue.com
Introduction
Thank you for having chosen a
1 Channel dimmer
. If you follow the instructions given in this manual, we are sure that
you will enjoy this device for a long period of time.
If the device has been exposed to drastic temperature fluctuation (eg. after transportation), do not switch it on
immediately. The arising condensation water might damage your device. Leave the switched off until it has reached
room temperature.
Especificaciones
Voltage
AC 240V 50 Hz / 50 Hz, 16A
Power
3.000 max.
DMX Input / Output
3 Pin female XLR
Operating Instructions
1, Switch on the device: The LCD will display the current DMX address after the system automatic check (about two
seconds).
2. Connect the device with any DMX signal source via 3Pin XLR wire, when the system find the DMX signal, the DMX
signal indicator will fast flash, or the indicator will be dark.
3. Mode menu A001-512: DMX address, Press UP/DOWN to set the DMX address.
P000-050:Pre-heating, Press UP/DOWN selects the value between 0%-50%
D000-100:Dimming.PressUP/DOWN choose the value between 0%-100%
It should not be over the value for protecting the overload.
L/S: CURVEMENU. Press UP/DOWN to select
L: Linear
S: Switch
ENGLISH
