8.INSTALLATION
Here are a series of recommendations to follow for proper installation of the unit.
Installation,repair and maintenance of these units must be made with caution because the presence of electrical,
electronic and circuit pressure system refrigerant.Only trained and qualified personnel should perform all
installation,adjustment and maintenance unit.
The manufacturer declines all liability for negligence and breach of safety standards described below:
- Work in total safety, free from obstacles and clean environment.
- Comply with regulations.
- Before commissioning of the unit, excellent condition confirm the same and its components.
- Wear safety goggles and gloves while working. Use quenching cloth during operations welding.
- Put in place strong units that can support the weight bearing and allow the right posterior maintaining it.
- Use the specified cables and make a proper connection at the terminals.
- Make a separate attack unit.
- Check the supply voltage corresponds to the plate.
- Perform the corresponding ground.
- Perform the work safely install hydraulic and drainage pipes as shown of this manual.
- During operation of the drive circuit part5s refrigerant. (compressor line download) can reach temperatures.
inside the unit.
- The unit can work in environments "normal" residential, commercial or light industry. The unit can not be installed in
explosive atmosphere environment. For applications Special should consult the manufacturer.
Before starting the installation or maintenance operations of the unit disconnect switch general power. Electrical
shock can cause personal injury.
above 70 º C. Take special care when accessing the
8.1 SAFETY CONSIDERATIONS
MOST IMPORTANT!
1.
Make sure it is not in cooling mode during first operation or test running, until you make sure
the air conditioning water pump is working properly and water circuit is recycling soothly.
2.
Recommand to test the water pump working condition and water circuit directly before switch
on the heat pump.
3.
Select a big enough water pump for the air conditioning water circuit.
4.
Always keep the electricity connnection with the heat pump to enable inner antifreeze
function wich is valid with electrcity supply.
8
