15
Copyright © 2016 TripSpark Technologies, its subsidiaries and affiliates. All rights reserved.
Torque Settings
There are a number of items that may need to be installed to a specific torque level. This includes the
Main Cable Cover, Mounting Ball, RF Cable Cover and antennas. The following Table lists the
recommended torque settings for installing these items. Over and under torqueing can lead to product
damage and/or failure.
We recommend using a calibrated torque screwdriver for tightening all screws. A Huber Suhner SMA
torque wrench (74Z-0-0-21) is recommended for tightening the Antenna cable.
Description
Part Number
Recommended Torque
Oz. In
N.cm
Main Cable Cover
3-ENC-RNGRP226-XX
80-90
55-65
Mounting Ball
6-MNT-RAMCMN3X-XX
80-90
55-65
RF Cable Cover
3-ENCRNGRP301-XX
80-90
55-65
R-SMA Antenna Cable
6-ANT-XXXXXXXX-XX
140
100