Locking Cart
(50100)
Installing the Casters
Fro
nt o
f Ca
rt (A
)
White Plastic
Spacer (G)
Bo
tto
m o
f C
art
(A)
G
A
F
E
IMPORTANT CASTER INSTALLATION INSTRUCTIONS
Casters must be assembled correctly. The caster will stay on
tight if installed correctly.
B
Lock Washer
- Should be between the
propel nut and the bottom of the cart.
Bottom of Cart
White Plastic Spacer
- The grove in the
caster cover should fit snuggly to the hex
shape on the stem of the caster.
Caster
Propel Nut
- Hand tighten propel nut
to the stem of the caster with shown
components in between.
Nut should
be completely flush with surface
when adequately tightened. This does
require significant torque.
Lock the brake of
the caster so that the
wheel does not move
and the top of the
caster does not swivel.
Securely tighten the
caster in a clockwise
direction until the
caster is snug.
Remove all the 1 pocket trays
(C)
and Gently lay cart body
(A)
on its
back with the door facing up towards the ceiling.
Caster (B)
First disassemble each caster assembly.
