3
Installation
Note:
When the unit is connected to the USB-C port on your
computer and to a network via Cat5e/6 cabling, a network
connection will be automatically established. If no connection
is made, you can manually establish one by going to your
computer’s network settings page. For example, on a Mac
you would navigate to the Network section found in System
Preferences, click the ‘Assist Me’ button to get to the Network
Setup Assistant, then follow the prompts to establish a
connection
1.
Connect the unit’s USB Type-C connector to the
USB-C port on your laptop, tablet or other device.
2.
Connect up to three USB devices to the USB-A
hub ports on the unit.
3.
Connect the unit’s RJ45 port to a network using a
UTP cable (such as Tripp Lite’s N201-Series Cat6
cables).
4.
(U460-003-3AG-C and U460-003-3AGB-C)
Charge your device by connecting the USB-C
charger to the adapter’s USB-C port.
19-05-297-933745.indb 3
19-05-297-933745.indb 3
1/8/2020 5:11:25 PM
1/8/2020 5:11:25 PM
