Features
•
Powered from USB connection – no bulky AC Adapter
•
Fully automatic high speed bi-directional communication over parallel port
•
Allows current Microsoft Windows printer drivers to print seamlessly to USB
•
Full Plug & Play and Hot-Plugging
•
IEEE-1284 1994 (bidirectional parallel interface) Specification Compliant
•
Windows 98, and 2000 driver Support
•
No IRQ Required
System Requirements
•
USB Enabled PC, Notebook, Laptop or Hand-held.
•
Windows 98 or Windows 2000
•
USB Host Controller installed on the system.
•
CD Drive (to load software)
•
16Mb of RAM
Installation Procedures
Driver Installation:
1. Boot up PC. Plug the cable into the USB port of your PC or the USB hub if one is being used. If all
USB ports are in use, use a USB hub to add ports (4-Port Hub # U204-004-R). The cable will
automatically be detected. The
New Hardware Wizard
appears; click
Next
.
2. Choose
Search for the best drivers for your devic
e in the dialog box; click
Next
.
3. Choose your CD Drive
as your source. Insert the supplied CD in the CD Drive; click
Next
.
4. A dialog box will inform you that it has found the driver; click
Next
. The driver file will be copied to
your hard disk.
5. A dialog box informs you when the installation is completed; click
Finish
.
6.
Uninstalling the Driver:
1. Unplug the cable from the PC
2. Insert the CD that came with this package in CD Drive.
3. Run
the
UNINST.EXE
program found on the CD.
4. Reboot the computer.
Printer Installation:
1. If your printer has already been installed:
1.1. Remove the existing printer cable.
1.2. Plug the Centronics end of the USB-Parallel Printer Cable into the printer; turn the printer On.
1.3. Plug the cable into the USB port of your PC or the USB hub if one is being used. If all the USB
ports are in use, use a USB hub to add ports (4-Port Hub # U204-004-R).
1.4. Open the
My Computer
folder, then open the
Printers
folder.
1.5. Right Click on your Printer icon; select
Properties
from the menu; select the
Details
folder tab
1.6. Open the
printer port
listbox by clicking on the arrow
1.7. Select
LPT2: (STET)
from the list.
2. If your printer has not been previously installed:
2.1. Follow steps 1.2 to 1.4.
2.2. Double Click on the
Add Printer
icon
2.3. When prompted, select the printer manufacturer and model from the list provided by the
Add
Printer Wizard
2.4. When prompted for the printer port, select
LPT2: (STET)
from the list
