1
2
3
4
Accessories
Installation
Warning: After removing the unit from the shipping container, check for damage or missing parts (refer to the parts list below).
If you notice a problem, visit www.tripplite.com/support for service. Do not attempt to operate a damaged unit.
Accessory Parts List:
The procedures described in this section are for Tripp Lite wall-mount rack enclosure types and may not be appropriate for all applications. The
user must determine the fitness of hardware and procedures before mounting. If hardware and procedures are not suitable for your application,
contact Tripp Lite for assistance.
Installation Notes
• The SRCOOL2KWM is ideal for enclosures with perforated doors (not for use in enclosures with solid/acrylic glass/glass doors).
• If your building’s cooling system has night or weekend thermostat setbacks, has periodic shutdowns, or has limited cooling
capacity, you may need to consider alternatives to the standard installation. This product is meant to be used as a supplemental
cooling device, and cannot make up for significant fluctuations in building temperature or humidity.
Adjustable Exhaust Panel
(2 Sections)
Exhaust Duct Adapter
M6x16mm (4)
Directional Vent
M4x10mm (8)
Self-Tapping Screw (4)
Magnetic Door Panel (1)
Exhaust Duct
Extra Drainage Plug
Front Door Facing Installation
1
Attach the two brackets using the supplied
M4 x 10 mm screws.
2
With the unit facing forward, place it on
top of a wall-mount rack. Align the bracket
holes with the mounting holes on top of
the wall-mount rack.
Note:
Bracket holes will align with a Tripp Lite
rack. Other rack brands may require new holes
to be drilled into them.
3
Secure unit to wall-mount rack with the
supplied M6 x 16 mm screws.
Note:
If mounting to a rack brand other than
Tripp Lite, user must supply the mounting
hardware.
