background image

11

Specifications

Load Rating

Unit Dimensions

Shipping Dimensions

Model

Static

Rolling

Height

Width

Depth

Weight

Height

Width

Depth

Weight

SR42UBZ4

3000 lb 

(1361 kg)

2250 lb 

(1021 kg)

78.5 in 

(1994 mm)

23.63 in 

(600 mm)

43 in 

(1093 mm)

353 lb 

(161 kg)

85 in 

(2159 mm)

26 in  

(661 mm)

45 in 

(1143 mm)

395 lb 

(179 kg)

Storage and Service

Storage

The enclosure should be stored in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, 

conductive contaminants, dust and direct sunlight. Store the enclosure in its original shipping container if possible.

Service

Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended Warranty and On-Site Service Programs are also 

available from Tripp Lite. For more information on service, visit www.tripplite.com/support. Before returning your product for service, follow these steps:

1. Review the installation and operation procedures in this manual to insure that the service problem does not originate from a misreading of the 

instructions.

2. If the problem continues, do not contact or return the product to the dealer. Instead, visit www.tripplite.com/support.

3. If the problem requires service, visit www.tripplite.com/support and click the Product Returns link. From here you can request a Returned Material 

Authorization (RMA) number, which is required for service. This simple on-line form will ask for your unit’s model and serial numbers, along with 

other general purchaser information. The RMA number, along with shipping instructions will be emailed to you. Any damages (direct, indirect, special 

or consequential) to the product incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. 
Products shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA number on the 

outside of the package. If the product is within its warranty period, enclose a copy of your sales receipt. Return the product for service using an 

insured carrier to the address given to you when you request the RMA.

Warranty and Warranty Registration

5-Year Limited Warranty 

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 5 years from the date of 
initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion. 

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER 

THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF 
MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND 
CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or 
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from 

jurisdiction to jurisdiction). 

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are 

subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific application.

Warranty Registration

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See Web site for details.
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice.

Note on Labeling 

This symbol is used on the product: 

Ground Connection

201010160 • 933065-EN

1111 W. 35th Street, Chicago, IL 60609 USA

www.tripplite.com/support

Summary of Contents for SmartRack SR42UBZ4












Reviews: