Standard internal battery set provides 14 minutes runtime at half load and 4 minutes at full load
Extended runtime available with optional BP24V15RT2U, BP24V28-2U or BP24V70-3U external battery packs
Some external battery configurations require the use of Tripp Lite's
External Battery Configuration Software
(see manual)
Attractive all-black upright tower format
Simultaneous communications use via HID-compliant USB port, serial port, and SNMP/web card slot
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.
DB9 serial network interface supports RS-232 and contact closure messaging
Slot for optional SNMP/web card (part# SNMPWEBCARD)
Included PowerAlert UPS Power Management Software and cabling provides monitoring of in-depth site power conditions, full UPS status
and fault warnings, output load level and load bank power control
Compatible with Tripp Lite's WatchDog Service Monitoring/Rebooting Software (part# WATCHDOGSW)
Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions
Diagnostic LEDs
$250,000 Ultimate Lifetime
connected equipment insurance
(USA and Canada Only)
Specifications
OUTPUT
Output Volt Amp
Capacity (VA)
1000
Output kVA capacity
(kVA)
1
Output Watt Capacity
(watts)
800
Output power factor
0.8
Crest Factor
3:1
Nominal Output
Voltage(s) Supported
100V; 110V; 120V
Nominal Voltage details
120V default
Frequency
compatibility
50 / 60 Hz
Frequency
compatibility details
Output frequency matches input nominal on startup, defaults to 60 Hz on cold-start
Output voltage
regulation (line mode)
+/- 2%
Output voltage
regulation (Economy
line mode)
+/- 10%
Output voltage
regulation (Battery
mode)
+/- 2%
Built-in UPS output
receptacles
6 5-15R outlet(s)
Built-in controllable
switched load banks
Two switchable single-outlet 5-15R load banks
Output AC waveform
(AC mode)
Sine wave
Output AC waveform
(battery mode)
Pure Sine wave
INPUT
