4
Installation
1.
Remove the cover from the
P960-001-MSATA unit to expose the SSD
drive tray and mSATA connector.
2.
Insert the included nuts into the
corresponding slots on the board.
3.
Connect your drive by inserting it into the
mSATA connector. Keep the drive at a low
angle to minimize stress on the connector.
4.
Using the included screws, secure the drive
by screwing it into the nuts.
5.
When the drive is fully installed, place the
cover back on to protect the drive from
dust and other contaminants.
6.
Connect the unit to the SATA port on your
computer.
7.
Your drive is now ready for use.
16-08-036-933618.indb 4
8/19/2016 4:51:39 PM
