4
STEP 1: Plug the UPS into
a properly grounded outlet.
After plugging the UPS into a wall outlet, press the power button
to turn on the UPS
(See
Basic Operation
).
Note
: The UPS will not turn on automatically in the presence of live utility power.
STEP 2: Plug your equipment into the UPS.
Outlets marked BATTERY & SURGE offer UPS battery backup support during power
failures. Connect your vital computer equipment into these outlets.
Your UPS is designed to support electronic equipment only. You will overload the UPS if
the total volt-amp (VA) ratings for all the equipment connected to the BATTERY/SURGE
PROTECTED outlets exceed the UPS output capacity. To find your equipment’s VA ratings,
look on their nameplates. If the equipment is listed in amps (A), multiply the number
of amps by 230 to determine VA. For example: 1A × 230 = 230VA. If you suspect
you have overloaded the outlets, check Load Meter screens (see
Display UPS/Power
Conditions
in
Basic Operation
).
If the on-line AC power icon
does not illuminate when the UPS is turned ON, try the
following:
1. Make sure that the UPS is plugged into a live AC outlet.
2. Press the power button
to turn on the UPS. A beep should sound when the UPS
starts.
3. If the UPS still does not start, contact Tripp Lite Tech Support for assistance.
Quick Installation
