Tripp Lite NGI-S04C2, Owner'S Manual

Page: 116 / 138

116
Example:

L2SWITCH#configure terminal

L2SWITCH(config)#snmp community public rw trusted-host 192.168.200.106/24
8.1.2.2. Web Configuration
Parameter Description
Community Name
Community String
Enter a Community string; this will act as a password for
requests from the management station.
An SNMP community string is a text string that acts as a
password. It is used to authenticate messages that are sent
between the management station (the SNMP manager) and the
device (the SNMP agent). The community string is included in
every packet that is transmitted between the SNMP manager
and the SNMP agent.
Rights
Select Read-Only to allow the SNMP manager using this string
to collect information from the Switch.
Select Read-Write to allow the SNMP manager using this string
to create or edit MIBs (configure settings on the Switch).
Network ID of
Trusted Host
Type the IP address of the remote SNMP management station
in dotted decimal notation, for example 192.168.1.0.
Number of Mask
Bit
Type the length of the subnet mask bits.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.