107
7.2.2.
Web Configuration
Parameter
Description
Port Mirror Settings
State
Select option to enable / disable the port mirroring feature on
the Switch globally.
Monitor to Port
Select the port which connects to a network traffic analyzer.
All Ports
Settings in this field apply to all ports.
Use this field only if you want to make some settings the same
for all ports.
Use this field first to set the common settings and then make
adjustments on a port-by-port basis.
Source Port
Selects a port to monitor packets received and transmit or both.
Monitor Mode
Select a port to monitor as destination for the source port.
Select Ingress, Egress or Both to only copy the ingress
(incoming), egress (outgoing) or both (incoming and outgoing)
traffic from the specified source ports to the monitor port.
Select Disable to not copy any traffic from the specified source
ports to the monitor port.
Apply
Click
Apply
to take effect the settings.
Refresh
Click
Refresh
to begin configuring this screen afresh.
Summary of Contents for NGI-S04C2
Page 1: ...1...
