33
11. Hot Key Operation
11.11 Restore Default Values
This administrator-only hot key restores the KVM switch’s default values. To restore default values, key in the following hot key combination:
1. Invoke
HSM
with the
[Num Lock]
+
[-]
or
[Ctrl]
+
[F12]
combination.
2. Press
[R]
.
3. Press
[Enter]
.
After pressing [Enter], the command line displays
RESET TO DEFAULT SETTING
for three seconds; then the message disappears and you
automatically exit
HSM
.
11.11.1 USB Reset
If the USB loses focus and needs to be reset, perform the following:
1. Invoke
HSM
with the
[Num Lock]
+
[-]
or
[Ctrl]
+
[F12]
combination.
2. Press and release
[F5]
.
11.11.2 Hot Key Beeper Control
The beep can be enabled or disabled. The default setting is enabled. To disable, perform the following:
1. Invoke
HSM
with the
[Num Lock]
+
[-]
or
[Ctrl]
+
[F12]
combination.
2. Press and release
[B]
.
11.11.3 Mouse Emulation Control
The default setting is enabled. To disable, perform the following:
1. Invoke
HSM
with the
[Num Lock]
+
[-]
or
[Ctrl]
+
[F12]
combination.
2. Press and release
[M]
.
This procedure is a toggle; repeat the actions above to enable.
