3
Installation
Notes:
• SFP transceiver modules are static-sensitive
devices that require proper handling. An anti-static
ESD wrist strap or similar device should always be
used when handling a transceiver module.
• The transceiver module should never be installed
with cables already connected. Always remove
cables prior to installation to avoid damaging the
cable, cable connectors, and/or optical interface.
• Installing and uninstalling the transceiver module
numerous times will shorten its useful lifespan. Do
not uninstall and reinstall the module more than is
absolutely necessary.
1.
Remove the transceiver module from its
packaging, leaving the dust plug inserted in
the LC optical bores.
2.
Gently insert the transceiver module into the
module socket of your device, pressing on
the dust plug until it locks into place.
3.
Verify the transceiver module is locked into
place by trying to remove it from the module
socket without releasing the latch. If it stays
in place, it is seated properly. If not, you will
need to re-insert it, firmly pressing on the
dust plug until it locks into place.
16-09-100-9335FD-EN.indd 3
9/12/2016 10:08:43 AM
