Switches
Includes 2 front panel switches—one main on/off power switch and one dual function "alarm cancel" / "self test"
button
Front panel LEDs
5 front panel LEDs indicate line power status, battery power status, battery low/replace status, low/high input
voltage detected and overload status
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
1800 joules
EMI / RFI AC noise
suppression
Yes
AC suppression
response time
Instantaneous
PHYSICAL
Shipping weight (lbs)
30.5
Shipping weight (kg)
13.8
Unit Dimensions
(HWD/in)
11.75 x 7.25 x 7.25
Unit Dimensions
(HWD/cm)
29.8 x 18.4 x 18.4
Unit weight (lbs)
28.6
Unit weight (kg)
13
Cooling method
Convection
Material of
construction
Polycarbonate
Form factors
supported
Tower, wall mountable with optional
UPSWM
accessory
ENVIRONMENTAL
Relative Humidity
0 to 95%, non-condensing
COMMUNICATIONS
WatchDog
compatibility
Compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot
of application / OS or hard power off/on reboot of connected equipment - ideal for unattended kiosk applications
Network monitoring
port
Built-in USB port supports on battery, low battery, power restored, AC line voltage, DC battery voltage and battery
capacity messaging.
Software and cabling
included
PowerAlert software available for free download at www.tripplite.com, cable included
LINE / BATTERY TRANSFER
Transfer time from
line power to battery
mode
2-4 milliseconds
Low voltage transfer
to battery power
Switches to battery power as line voltage decreases to 99 volts or less. Resets back to line power mode as line
voltage increases to 104V or higher.
High voltage transfer
to battery power
Yes
SPECIAL FEATURES
Appearance
Attractive gray tower UPS
Cold Start
Yes, inverter can be "cold started" to enable temporary AC output during a power failure
