4
Installation
Note:
Test to make sure the entire installation works properly before pulling cables
through ceilings/walls.
1
Follow the instructions that come with the B132-004A Local Unit before
connecting the B132-100A Remote Unit.
2
Use Cat5e/6* cable to connect one of the Output ports on the B132-
004A Local Unit to the Input port on the B132-100A Remote Unit.
3
Connect a monitor to the
Video
port of the B132-100A Remote Unit
using a Tripp Lite P502-Series VGA cable.
4
Connect speakers to the
Audio
port of the B132-100A Remote Unit
using a Tripp Lite P312-Series 3.5 mm Mini-Stereo cable.
5
First turn on the monitor, and then turn on the computer connected to the
B132-004A’s
Source
port. If your picture is too dark, or is displaying a
“ghosting effect,” use the screwdriver included with the B132-100A to
adjust the Equalization and Gain controls.
*Use Zero-Skew UTP cable when extending the signal over 500 ft from the source.
B132-100A
Remote Unit
B132-004A Local Unit
200901120 93-2871.indd 4
2/12/2009 4:50:46 PM
