5
EDID Copy
4. The Red Power LED will illuminate to indicate that the transmitter
is receiving power. The Orange EDID LED will initially be off. When it
illuminates, the EDID information from the connected monitor has
been copied.
Note:
The Orange EDID LED blinks when an EDID scan is taking place, and
stops blinking and illuminates when the scan is complete. When a monitor is
connected, its EDID information will be copied and stored on the transmitter
unit. If no monitor is connected, the scan will still take place and the
orange LED will blink/illuminate, but no EDID information will be copied. The
information stored on the transmitter will remain unchanged.
5. Once you have completed your installation (see the following section
for installation instructions), you can verify that the EDID information
was copied via the Display Settings screen on your computer. If
the model name of the monitor that you copied is shown in the
Display field of the screen, the EDID information has been copied
successfully.
14-11-117-93-333B.indd 5
11/24/2014 2:51:42 PM