Tripp Lite B127E-1A1-HH Owner'S Manual Download Page 8

8

Warranty and Product Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year 
from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its 
sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material 
Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to 
TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied 
by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not 
apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or 
modified in any way. 
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES 
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion 
of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL 
OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY 
OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of 
equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or 
otherwise.

PRODUCT REGISTRATION 

Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing 
for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive  
and implementing  regulations, when customers buy new electrical and electronic equipment from Tripp Lite  
they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste

WARNING 

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to 
cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and 
illustrations may differ slightly from actual products.

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

19-12-001  93-394C_RevB

Summary of Contents for B127E-1A1-HH









Reviews: