17
Splitter Daisy-Chain Installation
(B127-004-H and B127-008H only)
1.
Make sure all equipment in the installation—such as TVs, Blu-ray
players and the transmitter—is powered OFF.
2.
Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cables), connect the HDMI source to the INPUT
port on the B127-004-H or B127-008H unit.
3.
Using a 6 ft./1.83 m HDMI 2.0 cable (such as Tripp Lite
P569-006-CERT or P568-006-2A cables), connect the LOCAL port
on the B127-004-H or B127-008H to the INPUT port on a second
B127-004-H or B127-008H unit.
4.
Repeat step 3 if connecting a third B127-004-H or B127-008H unit.
Note:
Only three levels of splitters can be cascaded.
5.
Optional:
Using an HDMI 2.0 cable (such as Tripp Lite
P569-XXX-CERT or P568-XXX-2A Series cables), connect a local
monitor to the LOCAL HDMI port of the last B127-004-H unit in the
installation.
Note:
Monitors with varying resolutions like 1080p or 4K 30 Hz can be
connected to the local HDMI port without affecting the 4K @ 60 Hz signal.
6.
Using Cat6 cable, connect one of the RJ45 output ports on the local
transmitter units to the RJ45 input port on a B127-100-H,
B127-200-H or B127-100-H-SR remote receiver unit.
7.
Repeat step 6 for each additional remote unit being connected.
8.
Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cables), connect the B127-100-H, B127-200-H
or B127-100-H-SR to a display.
9.
Repeat step 8 for each additional monitor you are connecting to a
remote receiver unit.
10.
Turn on the power to all your connected displays.
20-02-371-933918_Rev C.indd 17
20-02-371-933918_Rev C.indd 17
3/6/2020 1:46:30 PM
3/6/2020 1:46:30 PM