3
Extender Kit Installation
Notes:
1. Test to make sure the entire installation works properly before pulling cables through
ceilings/walls.
2. To achieve maximum distance and performance, use 24 AWG solid wire Cat5e/6/6a
cable. Using stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher
than 24 AWG, will result in shorter extension distance. Higher gauge cabling, such
as 26 AWG, has a more limited transmission capability than lower gauge cabling. All
Tripp Lite N202-Series Cat6 cables are made of 24 AWG solid wire cabling.
OPTIONAL LOCAL DISPLAY
1080p DISPLAY
USB Power
(to source or USB wall charger)
Up to 100 ft.
at 1080i
Up to 50 ft.
at 1080p (60Hz)
Blu-ray™ PLAYER
1.
Make sure the HDMI source is powered OFF.
2.
Connect the transmitter unit’s built-in HDMI connector to the HDMI
source.
3.
Optional:
Connect a local monitor to the LOCAL port on the transmitter
unit.
4.
Use the included USB Micro-B cable to connect the transmitter unit to a
USB wall charger or a USB port from the source.
17-01-160-9336A1.indb 3
2/22/2017 2:52:48 PM