142
Select
Enable Nagios
, specify the name of the device on the upstream server and determine the
check to be run on this port.
Serial Status
monitors the handshaking lines on the serial port and
Check Port
monitors the data logged for the serial port.
10.3.5 Configure Selected Network Hosts for Nagios Monitoring
The individual Network Hosts connected to the Console Server that is to be monitored must also be
configured for Nagios checks:
Select
Serial & Network: Network Port
and click
Edit
on the Network Host to be monitored.
Select
Enable Nagios,
specify the name of the device as it will appear on the upstream Nagios
server.
Click
New Check
to add a specific check which will be run on this host.
Select
Check Permitted TCP/UDP
to monitor a service that you have previously added as a
Permitted Service.
Select
Check TCP/UDP
to specify a service port that you wish to monitor, but do not wish to
allow external (SDT Connector) access.
Select
Check TCP
to monitor.