Recommended
Electrical Service
DC INPUT: Requires 12VDC input source capable of delivering 72A for the required duration (when used at full
continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive
applications, professional hardwire installation with 100A minimum battery system fusing is recommended. AC INPUT:
230VAC
Maximum input
amps / watts
DC INPUT: Full continuous load - 72A at 12VDC. AC INPUT: 6.2A at 230VAC with full inverter and charger load (2.2A
max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0%
based on AC output loading using the charger limiting set points - see manual for setting instructions)
Input connection
type
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: IEC-320 C14 inlet connection.
Voltage
compatibility (VAC)
230
Voltage
compatibility (VDC)
12
BATTERY
Expandable battery
runtime
Runtime is expandable with any number of user supplied wet or gel type batteries.
DC system voltage
(VDC)
12
Battery Pack
Accessory
(optional)
98-121
sealed lead acid battery (optional)
Battery recharge
rate
Selectable 5/20 amp
LEDS ALARMS & SWITCHES
Switches
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant
on/off control of the inverter system when used in conjunction with optional
APSRM4
accessory when used in inverter
mode.
Front panel LEDs
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
SURGE / NOISE SUPPRESSION
AC suppression
joule rating
840
PHYSICAL
Shipping weight
(lbs)
20
Shipping weight
(kg)
9.1
Cooling method
Multi-speed fan
Unit Dimensions
(HWD/in)
7 x 8.75 x 9
Unit Dimensions
(HWD/cm)
17.78 x 22.23 x 22.86
Shipping
Dimensions
(HWD/in)
12.5 x 11 x 10.75
Shipping
Dimensions
(HWD/cm)
31.75 x 27.94 x 27.31
Unit weight (lbs)
18.6
