13
Using the LCD Touchscreen
Environment
Press
Environment
on the drop down menu to view a panel for
each E2 module connected to the PDU. Use the and to view
other E2 modules.
Note:
The available information will vary based on the E2 module.
Mobile Access
A unique QR code is generated each time the Mobile Access
panel is accessed. Make sure the PDU and mobile device are
on the same network. Scan the code with a QR code reader on
your mobile device for read-only access to the PowerAlert Device
Manager.
When accessed through the QR code, PowerAlert Device Manager
is in read-only mode. To access the PDU with full read/write control
from a mobile device on the same network, enter the device’s IP
address in your browser and login to PowerAlert Device Manager as
a user with read/write credentials.
Note:
If the Mobile Access panel is blank, a QR code will not be generated
until a valid static or dynamic IP address is assigned to the PDU.
