USER GUIDE
10
11.
Operating the KVM Extender
Once the system is connected there are 2 ways to switch
between the 2 computers / KVM workstations.
At the Receiver, press the Select button
Or
At the keyboard, press
Shift
followed by + or
-
.
Control LEDs
Control LED
On
Blinking
Off
Receiver
Receiver controls
the Transmitter
computer
Transmitter controls
its own computer
Working at
Receiver
computer
Transmitter
Receiver controls
the Transmitter
computer
N/A
Working at
Transmitter
computer
Adjusting the picture
When the Transmitter computer is controlled from the Receiver,
you can adjust the picture quality using a small flat screwdriver
to turn the Picture adjuster located on the Receiver’s rear panel.
See Figure 4.
Timeout
When there are 2 workstations in the system you can gain
control at either workstation when the other workstation is idle
for 1 second. This timeout period can be altered in the Settings
mode to between 1-99 seconds, as explained on page 12.
