Introduction
Congratulations on your purchase of the Triplett Model VBDL100. The
model VBDL100 can measure and record shock and vibration
(acceleration) readings over its ± 18g measurement range. This device
will record 3
‐
axis g
‐
force and related peaks to provide a history of shock
and vibration conditions. The real time clock provides time stamps for all
data.
The user can easily configure the logging rate, high/low alarm and start
‐
mode, and download the stored data by plugging the VBDL100 into a
PC's USB port and running the supplied PC software. Measurement
data can be plotted, printed and exported for use with other applications
such as word processors and spreadsheets. The data logger is supplied
with a long
‐
life 1000 hour lithium battery.
The VBDL100 memory uses a 4MB Flash device that can hold 168042
Normal recordings or 112028 Motion Detection recordings per axis
Description
Meter Description
1.
USB connector
2.
RECORD LED
3.
ALARM LED
4.
Datalogger Start / Stop Button
5.
Axis reference diagram
Note:
Battery compartment access screws (2) located on rear of unit.
Refer to the battery installation section
f
or further details.
