Probe Measurements
Swing the stem probe to the OUT position of the housing. The
meter will automatically turn ON and the LCD will display the probe
temperature.
While measuring, the probe measure icon will appear in the down
of the LCD
Fold the stem probe back to the IN position and the meter will turn
OFF.
Changing Temperature Units (°F/°C)
Press the set button five times, the C/F symbol will flash, then
press the
“Light” button or “Meas” button to change the
temperature unit.
Setting HI/LOW ALARMS
Press the SET button once to set high alarm value, the
“Hi”
symbol will flash
.
Press the
“SCAN/ Meas/
UP
” Button to increase the high alarm
value.
Press the
“Flashlight/
DOWN
”
Button to reduce the high alarm
value.
Press the
SET
button twice to set high alarm ON/OFF,
Pr
ess the “SCAN/ Measure Button” or the “Flashlight Button to
disable the ON/OFF High Alarm.
Press the SET button three times to set low alarm value, the
“Low” symbol will flash, Press the “SCAN/ Meas/
UP
” button to
increase the high alarm value,
