Capacitance Measurements
WARNING
: To avoid electric shock, discharge the capacitor under test before
measuring.
1.
Set the function switch to the ΩCAP position.
2.
Insert the black test lead into the
COM
input jack and the red test lead
into the
Positive
input jacks.
3.
Touch the test probe tips across the part under test, If
“OL”
appears in
the display, remove and discharge the component.
Read the capacitance value in the display.
4.
The display will indicate the proper decimal point and value.
Frequency Measurements
1.
Insert the black test lead into the
COM
input jack and the red test lead
into the
Positive
input jacks.
1.
Set the function switch to the
VAC Hz/%
Position.
2.
Press
MODE
Button to select the Frequency (
Hz
) or Duty Cycle (
%
).
3.
Touch the test probe tips across the part under test.
4.
Read the value on the display.
5.
The display will indicate the proper decimal point and value.
Temperature Measurements
1.
Set the function switch to the
TEMP
position.
2.
Insert the Temperature Probe into the negative
COM
and
Positive
jacks,
observing polarity.
3.
Touch the Temperature Probe head to the device under test, Continue to
touch the part under test with the probe until the reading stabilizes.
4.
Read the temperature on the display, The digital reading will indicate the
proper decimal point and value.
5.
Use the
MODE
Button to select °C or °F.
WARNING:
To avoid electric shock, be sure the thermocouple probe has
been removed before changing to another measurement function.
