Electrical Specifications
Measurement
Range
Resolution
Accuracy
MPH (Miles per hour)
2.5 to 44.7 MPH 0.2 MPH
± (3%rdg
+0.4MPH)
km/hr (kilometers per
hour)
4.0 to 72.0 km/h 0.7 km/h
± (3%rdg
+1.4km/h)
Knots (nautical miles per
hour)
2.1 to 38.9
knots
0.3 knots
± (3%rdg
+0.6knots)
m/sec (meters per
second)
1.1 to 20.0 m/s 0.01 m/s
± (3%rdg
+0.2m/s)
ft/min (feet per minute)
216 to 3936
ft/min
20ft/min
± (3%rdg
+40ft/min)
Beaufort force
1 to 8 BF
1 BF
± 1
Temperature
0 to 122
o
F
0.1
o
F
±1.8
o
F
-18 to 50
o
C
0.1
o
C
±1
o
C
Maintenance
Battery Replacement
The AM200 has a low battery indicator (battery symbol). Important: Turn the meter off before
opening the battery compartment. Using a coin, turn the battery compartment cover CLOCKWISE
to remove it. Once opened, observe the position of the battery, placing the new one in the same
position. Secure the battery compartment cover and dispose of the lithium battery in accordance
with local, state, or national disposal codes.
All EU users are legally bound by the Battery Ordinance to return all used
batteries to community collection points or wherever batteries / accumulators
are sold.
Disposal in household trash or refuse is prohibited.
Disposal:
Follow the valid legal stipulations in respect of the disposal of the
device at
the end of its lifecycle
Other Battery Safety Reminders
Never dispose of batteries in a fire. Batteries may explode or leak.
Never mix battery types. Always install new batteries of the same type.
Impeller Replacement
Remove the set screw next to the impeller assembly (on the rear of the meter). Twist the impeller
assembly counter-clockwise to the OPEN position and remove
it.
Install impeller by inserting & twisting the new impeller assembly clockwise Tighten
the set screw.