Safety
International Safety Symbols
This symbol, adjacent to another symbol or terminal,
indicates the user must refer to the manual for further
information.
This symbol, adjacent to a terminal, indicates that, under
normal use, hazardous voltages may be present
Double insulation
SAFETY NOTES
•Do not exceed the maximum allowable input range of any
function
•Do not apply voltage to meter when resistance function is
selected.
•Set the function switch OFF when the meter is not in use.
WARNINGS
•Set function switch to the appropriate position before
measuring.
•When measuring volts do not switch to current/resistance
modes.
•When changing ranges using the selector switch always
disconnect the test leads from the circuit under test.
•Do not exceed the maximum rated input limits.
CAUTIONS
Improper use of this meter can cause damage, shock, injury
or death. Read and understand this user manual before
operating the meter.
Always remove the test leads before replacing the battery.
Inspect the condition of the test leads and the meter itself for
any damage before operating the meter. Repair or replace any
damage before use.
Use great care when making measurements if the voltages
are greater than 25VAC rms or 35VDC. These voltages are
considered a shock hazard.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
