Navigate to DELETE ALL in the menu, press the OK button. Select
YES or NO using the
UP or DOWN buttons. Confirm with the OK button.
Video Output
This function allows live pictures or recorded photos and videos to
be displayed on a
TV screen or beamer. First make sure that the Video format is set
correctly to the used
TV system (PAL or NTSC). (See the Menu set up section.) Connect
the scope video cable to the display unit TV out jack. Ensure that
the other end of the video cable is well connected to the TV or
beamer.
Press the OK button to select menu options, select Video Output
and press the OK button.
The scope unit screen will turn black and the display will be shown
on the TV. You can
transfer the screen back to the display unit by selecting the same
function.
Date/Time Setup
Press UP button & DOWN button to select year/month/day or
hour/minute/second. Press
PHOTO button to increase the value and the REC button to
decrease
the value
The date
and time
can be
displayed
in the
preview
image mode. Use either the PHOTO or REC button
to toggle
between display “ON” and “OFF” Confirm selection and exit menu
by pressing OK.
