PROBLEM
CAUSE
SOLUTION
Machine does not work
Power switch not in "on" position
Turn power switch "on"
Power cord not plugged into outlet
Plug power cord into outlet
Power cord is faulty
Replace with approved power cord
Building circuit breaker tripped
Reset circuit breaker
Faulty wiring
Contact Distributor
Faulty on / off switch
Contact Distributor
Brush does not work
Brush circuit breaker tripped
Check brush and belt for obstructions and
remove as needed
Reset circuit breaker
Poor brush pickup
Incorrect brush height adjustment
Adjust brush height
Clogged brush
Remove debris from brush
Brush is worn
Contact Distributor
Loose brush drive belt
Inspect belt and replace as needed
Low suction
Vacuum hose clogged
Remove vacuum hose and check for
obstructions
Vacuum hose faulty
Check vacuum hose for loose cuffs or holes
and replace as needed
Filters clogged
Remove vacuum filter and exhaust filter and
clean
Vacuum bag full
Check vacuum bag / filter and relplace as
needed
BASIC TROUBLESHOOTING
BASIC TROUBLESHOOTING
BASIC TROUBLESHOOTING
BASIC TROUBLESHOOTING
