left of the machine when you are standing behind it)
1) Place cord wrap assembly (2 pieces) in place, and snug them
2) Assemble hardware in the following order spacer, letf handle
together with hex bolt. (actual cord wrap faces to the
bracket, nylock nut. (do not over tighten nylock nut, Only
tighten it enough to hold handle in place when compression
lever is in down position)
rd so they lean against the motor.
2) Push the two handle brackets forwa-
1) Remove nut and spacer from handle
bracket assembly.
1) Connect power cords together.
STEP 1
STEP 4
6mm
STEP 3
handle clamp blocks
1) Remove handle clamp
base with hex head
3) Re-attach the blocks to the
2) Place handle assembly into
blocks with hex head
5mm
5mm
STEP 2
Handle Release Assembly Instructions
-5-
Handle Release Assembly Instructions
