Note:
- (*) 10 dB. Half space anechoic
- Specifications subjected to change without
previous notice.
2.3. Technical features
3. MOUNTING AND PLACEMENT
For a proper installation of the acoustic cabinet
systems, it is strongly recommended to carefully
read the following advices.
3.1. Placement
The "Full Range" cabinets should be located in a
high position (between two or three meters),
slightly inclined to the audience. If the
loudspeakers are located too low, the listeners
at the end of the room will not receive enough
sound pressure level.
They may be located together, in cluster form,
is strongly recommended to locate subwoofer
possible, place the subwoofers under the
the above option can not be carried out, then
he TOP.S 26A are equipped with a tripod
be
or a mobile application, whether it is an outdoor
o obtain a clear and free-distortion
one next to the other, taking advantage of their
trapezoidal shape. They may be also located
one on top of the other one, always trying to
maintain the slight inclined orientation that
guarantees the best coverage both in horizontal
or vertical.
It
units on the floor as they can take advantage of
the so-called “floor-effect”, thus increasing the
response in the low frequencies.
If
same acoustic axis used for the satellites.
If
they should be placed in an intermediate point
between the left and right channels.
3.2. Tripod use
T
socket for use with Standard 35mm tripods.
Do not use the tripod on non-flat floors and
careful not to raise the cabinets too high on the
tripod, as they may become unstable.
3.3. Live applications (mobile)
F
or indoor installation, the common location is to
place the bass units (one or two per channel) on
each side of the stage or the dancefloor.
T
reproduction, it is advisable to place the mid-
high units on top of the low units keeping
between them an approximate height of two
meters. If such height cannot be achieved nor
maintained, it is advisable to use the classical
tripod for each mid-high cabinet and leave the
low units on the floor.
TOP.S 26A
Line Input XLR
(BALANCED)
1,5V-10 k
Ω
Mains
230V +/- 10%
Full power
consumption
2 A
Components:
Woofer
Driver
2x6" Kevlar Cone
1" Titan. Dome Tweeter
Directivity H/V
90º Conical
Frequency
Response(*)
65 Hz – 20 kHz
Maximum SPL (1m)
118 dB
Dimensions (H x W x
D)
500 x 239 x 258 mm
Weight
8,4 kg
TOP.S 26A
Line Input XLR
(BALANCED)
1,5V-10 k
Ω
Mains
230V +/- 10%
Full power
consumption
2 A
Components:
Woofer
Driver
2x6" Kevlar Cone
1" Titan. Dome Tweeter
Directivity H/V
90º Conical
Frequency
Response(*)
65 Hz – 20 kHz
Maximum SPL (1m)
118 dB
Dimensions (H x W x
D)
500 x 239 x 258 mm
Weight
8,4 kg
TOP.S 26A
2009
4