2.3. Technical features
Note:
- (*) 10 dB. Half space anechoic
- Specifications subjected to change without
previous notice.
3. MOUNTING AND PLACEMENT
For a proper installation of the acoustic cabinet
systems, it is strongly recommended to carefully
read the following advices.
3.1. Placement
The "Full Range" cabinets should be located in a
high position (between two or three meters),
slightly inclined to the audience. If the
loudspeakers are located too low, the listeners
at the end of the room will not receive enough
sound pressure level.
They may be located together, in cluster form,
one next to the other, taking advantage of their
trapezoidal shape. They may be also located
one on top of the other one, always trying to
maintain the slight inclined orientation that
guarantees the best coverage both in horizontal
or vertical.
It is strongly recommended to locate subwoofer
units on the floor as they can take advantage of
the so-called “floor-effect”, thus increasing the
response in the low frequencies.
If possible, place the subwoofers under the
same acoustic axis used for the satellites.
If the above option can not be carried out, then
they should be placed in an intermediate point
between the left and right channels.
3.2. Tripod use
The
TOP.S 12A
are equipped with a tripod
socket for use with Standard 35mm tripods.
Do not use the tripod on non-flat floors and be
careful not to raise the cabinets too high on the
tripod, as they may become unstable.
3.3. Live applications (mobile)
For a mobile application, whether it is an outdoor
or indoor installation, the common location is to
place the bass units (one or two per channel) on
each side of the stage or the dancefloor.
To obtain a clear and free-distortion
reproduction, it is advisable to place the mid-
high units on top of the low units keeping
between them an approximate height of two
meters. If such height cannot be achieved nor
maintained, it is advisable to use the classical
tripod for each mid-high cabinet and leave the
low units on the floor.
TOP.S 12A
Line Input XLR
(BALANCED)
1,5V-10 k
Ω
Mains
230V +/- 10%
Full power
consumption
4 A
Components:
Woofer
Driver
1x12" Neo. Magnet
1" ¾ Titanium
Diaphragm
Directivity H/V
50º to 100º x 55º
Rotat.Horn
Frequency
Response(*)
48 Hz – 19 kHz
Maximum SPL (1m)
125 dB
Dimensions (H x W x
D)
627 x 412 x 401 mm
Weight
20,3 kg
TOP.S 12A
2009
4
