Maintenance and Repairs
Storm-OM-001
49
28 February 2020
This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
10.7
Replacing a VR Helmet
To replace the VR Helmet, make sure the Storm is off.
1-
Remove the Leap plastic cover over the VR Helmet by removing the 3 screws.
2-
Disconnect the VR Helmet from the cable harness.
3-
Connect the new VR Helmet and run room configuration.
When replacing a VR Helmet, it is important to pass the cables in the
same manner that the cables are position originally.