Maintenance and Repairs
Storm-OM-001
43
28 February 2020
This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
10.2
Replacing the control Box
The system uses a
S type
Actuator Control Module
.
It is imperative to always replace
a control box by another one of
the same type.
Start the process by following
steps 1
to
8
Remove
the cables, connectors and plates on both sides.
1-
Remove the 8 hex screws using a
2.5mm allen key to remove the access
cover.
2-
You can now remove the cover.
Remove the cables on the left of the
ACM.
