7
D04-067en202111 Quick Guide Wiper W55 V2
TriOS Mess- und Datentechnik GmbH · Bürgermeister-Brötje-Str. 25 · D-26180 Rastede · Germany
fon: +49 (0) 4402 69670 - 0 · fax: +49 (0) 4402 69670 - 20 · [email protected] · www.trios.de
Wiper W55 V2
//
Quick Guide
7 Connecting the wiper to the TriBox 3
Necessary components
Connection
1.
Open the lid of the TriBox3 by removing the dark grey covers and unscrewing the screws underneath.
TriBox3
Wiper
Open End Cable
2.
Place the wiper cable through the TriBox3 cable guide and tighten the cable guide on the wider part of
the cable.
3.
Connect the blue-black wire of the wiper cable to the CON15 connector, pin 2 and the brown-white wire
to the CON15 connector, pin 1. Make sure the screws are tightened.
4.
Close the TriBox3 lid, tighten the screws and place the grey covers on the TriBox3.
5.
The wiper settings can now be adjusted in the TriBox3 menu under “Cleaning”. Cleaning time should be
at least 10 seconds and the valve must be activated.