Troubleshooting
If your Trionic Veloped does not work satisfactory, you can
check it by following the troubleshooting guide below. If the
guide does not help you solve the problem, please contact your
retailer, service provider, distributor or Trionic Sverige AB.
Environmentally Friendly
The Trionic Veloped is manufactured in the way to have as little
negative impact on the environment as possible during its lifecy-
cle. When the product has served its purpose it can be scrapped
and the parts can be recycled.
•
The product’s aluminium components are separated from
the remaining parts when sorted for recycling. The parts are
sorted into metal, plastic and mixed materials.
•
The greater part of the product is made of aluminium, steel
and plastic.
•
Examples of components made of mixed materials are the
brake levers, wheels and gripbar.
•
If you are uncertain of how to handle the recyclable mate-
rial, please contact your local authorities, as different muni-
cipalities/recycling companies follow different recycling
methods.
Trionic Sverige AB is a member of REPA, PRO Europe (Die
Grüne punkt) and fully implements the European Directive on
Packaging and Packaging Waste dated December 20, 1994.
Problem:
The seat is sagging/too low.
Possible cause:
The rear velcro band under
the seat base needs to be tightened, or the
Veloped is not correctly unfolded.
Action:
Remove the seat cover and tighten
the rear velcro band of the seat base, with
the Veloped fully unfolded. Do not tighten
the Velcro band too much since it may turn
the sliding of the seat back and forth more
difficult.
Problem:
Difficult steering.
Possible cause:
The front wheel is adjusted
for irregular terrain/upper position.
Action:
Change the setting of the front
wheel suspension to the easy turning mode/
lower position, as described in the chapter
«Change the Front Wheel Setting».
Problem:
Poor brake function.
Possible cause:
The brake hub or brake band
is worn out, or the cable is not tight enough.
Action:
Adjust the brake cable tension as
described in the chapter «Brake
Adjustment».
Problem:
The rear or front wheels are not
secured.
Possible cause:
The wheel has not been cor-
rectly attached.
Action:
Check that the push button of the
axle locks correctly. Please contact your
service provider if the wheel does not lock
correctly in position.
Summary of Contents for Veloped 12er L
Page 1: ...User Manual English...
